INSYS ADSL 1.0 Benutzerhandbuch Seite 34

Befehlsreferenz
Befehl Beschreibung
Anzeige der statistischen Informationen
statistic
Zeigt statistische Informationen der DSL-Verbindung des INSYS ADSL 1.0 an.
Beispiel:
Maximum attainable downstream rate:
Maximum attainable upstream rate:
Cells received on PHY in RX direction:
Cells received on PHY in TX direction:
Cell drop count on PHY:
Reed Solomon corrected errors in downstream:
Reed Solomon uncorrected errors in downstream: 0
Reed Solomon corrected errors in upstream:
Reed Solomon uncorrected errors in upstream:
Number of octets in downstream:
Number of octets in upstream:
SEF (Severeley Errored Frames) count in CPE:
LOS (Loss Of Signal) count in CPE:
Seconds since the most reset DSL Showtime:
Seconds since beginning of counters of all following values:
327
Number of Loss-Of-Framing errors:
Number of errored seconds:
Number of FEC errors detected by CPE: 0
Number of FEC errors detected by CO:
Number of HEC errors detected by CPE: 0
Number of HEC errors detected by CO:
Number of CRC errors detected by CPE: 0
Number of CRC errors detected by CO:
Anzeige des Synchronisationsstatus
state
Zeigt den Synchronisationsstatus des INSYS ADSL 1.0 an.
Rückmeldung:
state : Handshake
state : Training
state : Showtime
34
Das INSYS ADSL 1.0 versucht, sich mit dem DSLAM zu verbin-
den
Das INSYS ADSL 1.0 verbindet sich gerade mit dem DSLAM
Das INSYS ADSL 1.0 ist mit dem DSLAM verbunden (SYNC)
26004000
1379000
0
164
0
0
0
0
254
81
0
0
307
0
0
0
35
0
INSYS ADSL 1.0