Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Main Wash
Main Wash symbol indicating that the main
wash step has started appears on the display.
Rinse
Rinse symbol indicating that the rinsing step has
started appears on the display.
Softener
Softener symbol indicating that the softener step
has started appears on the display.
Spin
Appears at the beginning of the final spin step
and remains lit during Spin and Pump special
programmes.
If the machine does not pass to the spinning
C
step, Rinse Hold function might be active or
the automatic unbalanced load detection
system might be activated due to the
unbalanced distribution of the laundry in the
machine.
Loading door lock
There is a locking system on the loading door of
the machine that prevents opening of the door in
cases when the water level is unsuitable.
Door Locked symbol appears when the loading
door is locked. This symbol will flash until the
loading door becomes ready to open when
programme completes or the machine is paused.
Do not force to open the loading door in this
step. Symbol disappears when the door is
ready to open. You can open the door when the
symbol disappears.
Changing the selections after
programme has started
Switching the machine to pause mode
Press Start / Pause / Cancel button to switch the
machine to pause mode. Pause symbol appears
on the display indicating that the machine is
paused. Start symbol disappears.
F1
Changing the auxiliary function,
speed and temperature
Depending on the step the programme has
reached, you can cancel or activate the
auxiliary functions; see, "Auxiliary function
selection".
You may also change the speed and
temperature settings; see, "Spin speed selection"
and "Temperature selection".
F3
F2
F4
Adding or taking out laundry
1.
▪
Press Start / Pause / Cancel button to
switch the machine to pause mode. The
programme follow-up light of the relevant
step during which the machine was
switched into the pause mode will flash.
2.
Wait until the Loading Door can be
▪
opened.
3.
▪
Open the Loading Door and add or take
out the laundry.
4.
▪
Close the Loading Door.
5.
▪
M ake changes in auxiliary functions,
temperature and speed settings if
necessary.
6.
P ress Start / Pause / Cancel button to start
▪
the machine.
The loading door will not open if the water
C
temperature in the machine is high or the
water level is above the door opening.
Child Lock
Use Child Lock function to prevent children from
tampering with the machine. Thus you can avoid
any changes in a running programme.
You can switch on and off the machine
C
with On / Off button when the Child Lock
is active. When you switch on the machine
again, programme will resume from where it
has stopped.
To activate the Child Lock:
Press and hold 2
and 4
nd
buttons for 3 seconds. "Con" appears on the
display.
Same phrase will appear on the display
C
if you press any button when Child Lock is
enabled.
To deactivate the Child Lock:
Press and hold 2
and 4
nd
buttons for 3 seconds. "COFF" appears on the
display.
Do not forget to disable the child lock at
C
the end of the programme if it was enabled
before. Otherwise, machine will not allow to
Auxiliary Function
th
Auxiliary Function
th
ENGLISH
25
Werbung
Kapitel
Inhaltsverzeichnis
Fehlerbehebung
