Auxiliary Function Selection; Time Display - Grundig GWM 4922 SY Bedienungsanleitung

Auxiliary function selection

Select the desired auxiliary functions before
starting the programme. Furthermore, you may
also select or cancel auxiliary functions that are
suitable to the running programme by pressing
the Start / Pause / Cancel button when the
machine is operating. For this, the machine must
be in a step before the auxiliary function you
are going to select or cancel.
Depending on the programme, press a, b, c or
d buttons to select the desired auxiliary function.
Symbol of the selected auxiliary function
appears on the display.
a b
Some functions cannot be selected together.
C
If a second auxiliary function conflicting with
the first one is selected before starting the
machine, the function selected first will be
canceled and the second auxiliary function
selection will remain active. For example,
if you want to select Quick Wash after you
have selected the Prewash, Prewash will
be canceled and Quick Wash will remain
active.
An auxiliary function that is not compatible
C
with the programme cannot be selected.
(See "Programme and consumption table")
Auxiliary Function buttons may vary
C
according to the model of the machine.
• Ön Yıkama (Prewash)
A Prewash is only worthwhile for heavily soiled
laundry. Not using the Prewash will save energy,
water, detergent and time.
F1 appears on the display when you select this
function (a).
• Hızlı Yıkama (Quick Wash)
This function can be used in Cottons and
Synthetics programmes. It decreases the
washing times and also the number of rinsing
steps for lightly soiled laundry.
F2 appears on the display when you select this
function (b).
When you select this function, load your
C
machine with half of the maximum laundry
specified in the programme table.
c d
• Rinse Plus
This function enables the machine to make
another rinsing in addition to the one already
made after the main wash. Thus, the risk for
sensitive skins (babies, allergic skins, etc.) to be
effected by the minimal detergent remnants on
the laundry can be reduced.
F3 appears on the display when you select this
function (c).
• İlave Su (Plus water)
This function enables you to wash and
rinse your laundry with plenty of water in
Cottons, Synthetics, Delicates, and Woolens
programmes. Use this function for delicate
laundry that creases easily.
F3 appears on the display when you select this
function (c).
When you select this function, load your
C
machine with half of the maximum laundry
specified in the programme table.
• Kırışık Azaltma (Anti-Creasing)
This function creases the clothes lesser when
they are being washed. Drum movement is
reduced and spin speed is limited to prevent
creasing. In addition, washing is done with a
higher water level.
F4 appears on the display when you select this
function (d).
• Rinse Hold
If you are not going to unload your clothes
immediately after the programme completes,
you can use rinse hold function to keep your
laundry in the final rinsing water in order to
prevent them from getting wrinkled when there
is no water in the machine. Press Start / Pause
/ Cancel button after this process if you want to
drain the water without spinning your laundry.
Programme will resume and complete after
draining the water.
If you want to spin the laundry held in water,
adjust the Spin Speed and press Start / Pause /
Cancel button.
The programme resumes. Water is drained,
laundry is spun and the programme is
completed.

Time display

Remaining time to complete the programme
appears on the display while the programme
is running. Tim is displayed as "01:30" in hours
and minutes format.
ENGLISH 23