Main Menu 2; Lines Gamma To Privacy Zone - Monacor Tvccd-800Col Bedienungsanleitung

d) Press the button Enter. The request SET
GB
END POINT flashes. Enlarge the white field
with the cursor buttons to the desired size.
e) Press the button Enter.
After the adjustment has been made, select the
next menu line with the button
7) WHITE BAL white balance
Different light sources, like incandescent lamps,
fluorescent lamps, or the sun, have light of different
colour (colour temperature). To obtain a natural
colour reproduction, the camera may be adjusted
accordingly. Press the button Enter so many times
until the desired adjusting method is displayed:
ATW1 The camera automatically adjusts it -
self to the correct colour temperature between
2600 K and 6000 K.
ATW2 The camera automatically adjusts it -
self to the correct colour temperature between
2500 K and 10 000 K.
R:15 B:15 Manual adjustment by setting the
colour parts for red (R) and blue (B):
a) Go to the number for the red part with the
button
b) Adjust the red part with the buttons
and
c) Go to the number for the blue part with the
button
buttons
d) Repeat the adjustments alternately until the
picture reproduction has no more colour
defects.
After the adjustment has been made, select the
next menu line with the button
8) NEXT EXIT CANCEL DEFAULT
From the lower line it is possible to call the main
menu 2 (NEXT), to exit the menu (EXIT), to reset*
all adjustments to the previous adjustments (CAN-
CEL), or to call the factory adjustments*
(DEFAULT). Select the desired menu item with the
button ,
ton Enter.
*This also applies to the adjustments in the main menu 2 and
in all submenus, how ever, not for the adjustments in the
menu PROTOCOL (fig. 6).
7.2 Main menu 2 (fig. 4)
The following functions can be adjusted here:
Gamma correction
Picture sharpness
Electronic zoom via the submenu PTZ
Cover mask via the submenu PRIVACY ZONE
Camera identification via the submenu ID
Mirror-inverted picture display
Compensation of picture spots
Flicker compensation
Operation with IR floodlight
Select the menu item NEXT in the main menu 1 with
the button ,
button Enter (4) to call the main menu 2 (chapter 7.1.3,
operating step 8).
16
.
so that the number flashes.
.
and adjust the blue part with the
and .
.
, , or and confirm it with the but-
, , or (2, 3) and then press the

7.2.1 Main menu 2

lines GAMMA to PRIVACY ZONE

1) With the button
which an adjustment is to be changed.
2) GAMMA gamma correction (contrast matching)
Select the value 0,45 or 1 with the button Enter.
0.45 This value is usually used in video sur-
veillance systems.
1 Low contrast for picture processing systems
After the adjustment has been made, select the
next menu line with the button
3) APERTURE sharpness of picture
Select between HIGH (high sharpness), MID (nor-
mal sharpness) and LOW (poor sharpness) with
the button Enter.
After the adjustment has been made, select the
next menu line with the button
4) PTZ Electronic zoom, max. 2-fold
If the wide dynamic function in the submenu
ALC/ELC (chapter 7.1.2, menu item WD) is
switched on, the electronic zoom cannot be used.
As a note, <WD> is indicated instead of <SET> in
the menu line PTZ.
If <SET> is indicated, it is possible to call the fol-
lowing submenu with the button Enter:
PTZ MENU
EZOOM •--------
PAN DISABLE
TILT DISABLE
EXIT
a) The menu line EZOOM is activated and the cur-
sor flashes in the scale. Increase the zoom
factor with the button
the button . As soon as the zoom factor is ad -
justed to a value higher than 1, instead of the
note DISABLE a scale is likewise indicated in
the menu lines PAN and TILT.
b) Go to the line PAN with the button
the picture cutout with the button
horizontal displacement of the picture.
c) Go to the line TILT with the button
the picture cutout with the button
vertical displacement of the picture.
d) After the adjustment select the menu item EXIT
with the button
2 with the button Enter.
5) MIRROR mirror function
Switch on or off the mirror function with the button
Enter. Then select the next menu line with the but-
ton .
6) PRIVACY ZONE After selecting this line, use the
button Enter to call the submenu PRIVACY ZONE
to create a covering mask.
or select the menu line in
.
.
or decrease it again with
and select
or
and select
or
and to back to the main menu
by
by