Safety - Unitest CHB 15 Bedienungsanleitung

2.0 Safety

The UNITEST Clamp Meter CHB 15, CHB 35 and Clamp Adapter
CHB 10 have been manufactured and tested to comply with the
safety regulations for electronic measuring equipment contained
and left our works in a safe condition.
To maintain this condition, the user must observe the safety
instructions contained in this Instruction Manual.
WARNING !
The Instruction Manual contains information and advice that is
essential for safe operation and use of the instrument.
Before use study the Instruction Manual carefully, and follow it in
all details, Failure to follow the instructions, or neglecting warnings
can lead to serious injury, and damage to the instrument.
WARNING !
To avoid electric shock, safety measures must be observed when
working with voltages higher than 120 V (60 V) DC or 50 V (25 V)
RMS AC. These are the values of threshold contact voltages given
by DIN VDE. The values in brackets apply to medical and argricultural
applications.
WARNING !
Before each measurement make sure that the test leads and the
instrument are undamaged.
DANGER !
Only handle test leads and probes on the grips provided. Avoid
touching probes under any circumstance.
The relevant safety regulations for electrical plant and equipment
must be observed during all operations.
DANGER !
The instrument must only be used in the specified ranges.
Before opening battery case, instrument must be disconnected
from all circuits.
Protect the instrument from prolonged exposure to direct sunlight.
19