Other Console Main Menu Options; Security Configuration; Firmware Management; Enable Debug Messages - Fujitsu KVM s3-1621 Bedienungsanleitung

4.1.3

Other Console Main menu options

Besides the Network Configuration option, the Console Main menu of the KVM s3-1621
appliance has the following menu items: Security Configuration, Firmware
Management, Enable Debug Messages, Restore Factory Defaults, Reset Device, and
Exit. Each is discussed in the following section.
4.1.3.1

Security Configuration

Console Password: Enable or disable the console password using security for the
console (access requires an Admin account).
In the event that you forgot the password, type Help . You will be given a one-time use
key to supply to technical support, who will then supply you with a one-time use
password that you can use to access the Serial Port.
4.1.3.2

Firmware Management

This menu contains the Flash Download selection. For more information, see Appendix
5.1 on page 45.
4.1.3.3

Enable Debug Messages

This menu option turns on console status messages. Because this can significantly
reduce performance, you should enable debug messages only when instructed to do so
by technical support. When you are finished viewing the messages, press any key to
exit this mode.
4.1.3.4

Restore Factory Defaults

This menu option will restore all KVM s3-1621 appliance options to the default settings.
4.1.3.5

Reset the KVM s3-1621 appliance

You can use this menu option to initiate a soft reset of the KVM s3-1621 appliance.
4.1.3.6

Exit

This menu selection will return you to the ready prompt.
590-591-609D
Other Console Main menu options
43