Setting Up The Network - Fujitsu KVM s3-1621 Bedienungsanleitung

Installation
Figure 4 illustrates one possible configuration for the KVM s3-1621 appliance.
Figure 4: Example KVM s3-1621 appliance configuration
2.1.2

Setting up the network

The KVM s3-1621 appliance and KVM-IAs use IP addresses to uniquely identify the
appliances and the target devices. These appliances support both Dynamic Host
configuration Protocol (DHCP) and static IP addressing. To avoid confusion, have IP
addresses that are reserved for each appliance and remain static while the appliances
are connected to the network. For additional information on setting up the KVM s3-1621
appliance using the KVM s3 Client, and for information on how the KVM s3-1621
appliance uses TCP/IP, see the KVM s3 Client Installation and User's Guide .
8
Rack of
target servers
KVM s3-1621
appliance
Ethernet
Analog user
Digital user
Digital user
590-591-609D