Resetting The Keyboard And Mouse Values - Fujitsu KVM s3-1621 Bedienungsanleitung

• Click X or press Escape to exit the window without disconnecting a user.
If the User Status list has changed since it was last visible, the
mouse cursor will turn into an hourglass as the list is automatically
updated. No mouse or keyboard input is accepted until the list
update is complete.
Figure 22: Disconnect window
3.11.6

Resetting the keyboard and mouse values

You can reset the keyboard and mouse by clicking Commands - Device Reset. If the
keyboard or mouse is still not responding, you might be able to re-establish operation of
these peripheral switches by issuing a Reset command for the mouse and keyboard
settings on the target server. The Reset command sends a hot-plug sequence to the
KVM-IA, which causes the mouse and keyboard settings to be sent to the earlier
appliance model. With communication re-established between the KVM-IA and the
earlier appliance model, functionality is restored to the user. This function is for
Microsoft Windows-based computers only. Resetting the keyboard and mouse on a
target device running any other operating system might require that you reboot that
target device.
Press Print Screen. The Main window opens.
Click Commands - Display Versions - KVM-IA. Select the KVM-IA connected to
the mouse and keyboard that need to be reset from the list.
Click Version - Reset.
A message displays stating that the mouse and keyboard are reset.
Complete one of the following steps:
• Click OK to close the message field.
-or-
590-591-609D
Resetting the keyboard and mouse values
35