Setting A Screen Delay; Connecting A User To A Target Device; Selecting The Previously Selected Target Device; Disconnecting The User From A Target Device - Fujitsu KVM s3-1621 Bedienungsanleitung

3.3

Setting a screen delay

You can specify the length of time that elapses between when Print Screen is pressed
and when the OSCAR interface starts.
Press Print Screen to start the OSCAR interface.
In the Main window, click Setup - Menu.
In the Screen Delay Time field, type the number of seconds that you want to
elapse between when Print Screen is pressed and when the OSCAR interface
starts.
3.4

Connecting a user to a target device

Use the Main window of the OSCAR interface to select a target device to which you
want to connect. When you select a target device, the keyboard and mouse are
automatically reconfigured to the correct settings for that target device.
Select a target device by pressing Print Screen to start the OSCAR interface, and
then use one of the following procedures:
• In the Main window, double-click the target device name, EID number, or port
number.
-or-
• Type the port number, and press Enter.
-or-
• Type the first few characters of the target device name or EID number, and
press Enter.
3.5 Selecting the previously selected
target device
You can toggle between two selected target devices by pressing Print Screen and
then press Backspace.
3.6

Disconnecting the user from a target device

Press Print Screen and press Alt+0. A Free status flag in the OSCAR interface
indicates that the user is not connected to a target device.
590-591-609D
Setting a screen delay
17