Assigning Target Device Names - Fujitsu KVM s3-1621 Bedienungsanleitung

Table 4 describes the options in the Setup window.
Option Purpose
Menu Order the list of target devices by target device name, EID number, or
port number. Set a screen delay to specify the length of time that
elapses between when Print Screen is pressed and when the OSCAR
interface starts.
Security Set passwords to restrict access to the target devices. Enable the
screen saver.
Flag Change the display properties including timing, color, and location of the
status flag.
Language Specify the language that the interface is displayed in.
Devices Specify the number of ports that are on the attached tiered appliances.
Names Assign a unique name to each target device.
Keyboard Specify the keyboard country code.
Scan Set up a custom scan pattern for up to 16 target devices.
Preempt Specify preemption settings.
Network Specify the network speed and configuration, IP address, netmask, and
gateway for the switching system.
Table 4: Setup features to manage routine tasks for the target devices
3.9.1

Assigning target device names

Use the Names window to identify individual target devices by name rather than by port
number. The Names list is always sorted by port order. Names are stored in the KVM-
IA, so even if you move the cable or target device to another ARI port, the name and
configuration are recognized by the KVM s3-1621 appliance. If a target device is turned
off, you cannot modify the name of the KVM-IA.
Press Print Screen to start the OSCAR interface. The Main window opens.
Click Setup - Names. The Names window opens.
590-591-609D
Assigning target device names
21