Installation; Installation Overview; Installing A Kvm S3-1621 Appliance - Fujitsu KVM s3-1621 Bedienungsanleitung

2

Installation

The KVM s3-1621 appliance requires connectivity to a computer running the KVM s3
Client. Use the KVM s3 Client to view and control target devices (one at a time) attached
to a KVM s3-1621 appliance. The analog port does not require the KVM s3 Client for
operation. The analog port uses OSCAR for the Fujitsu Technology Solutions graphical
user interface. For more information, see Chapter 3, "Basic operations", beginning on
page 15, or the KVM s3 Client User Guide .
The KVM s3-162 appliance transmits KVM information between operators and target
devices attached to another appliance over a network using either an Ethernet or local
connection.
The KVM s3-1621 appliance uses TCP/IP for communication over Ethernet. Although
10BASE-T Ethernet can be used, using a dedicated, switched 100BASE-T network or a
1000BASE-T network will improve performance.
2.1

Installation overview

2.1.1

Installing a KVM s3-1621 appliance

Unpack the KVM s3-1621 appliance and verify that all components are present and
in good condition. See section 2.2 Required items on page 9 for additional informa-
tion.
Make all hardware connections between the power source, the KVM s3-1621
appliance, target devices, KVM-IAs, and Ethernet. See section 2.3 Safety
precautions on page 9 for more information.
Turn on the power and verify that all connections are working. See section 2.6
Verifying Ethernet connections on page 12 for instructions.
To configure the KVM s3-1621 appliance, complete one of the following steps:
• Use the console menu interface to configure the KVM s3-1621 appliance. See
Chapter 4, "Computer terminal operations", beginning on page 41 for
instructions.
-or-
• Use the KVM s3 Client to configure the KVM s3-1621 appliance. See the KVM
s3 Client User Guide for detailed instructions.
Make the needed mouse setting adjustments. See section 2.8 Adjusting mouse
settings on page 13 for instructions.
590-591-609D
7