General Information; Warranty; Safety Instructions - Becker Centronic TimeControl TC445-II Montage- Und Betriebsanleitung

Assembly and Operating Instructions
The TC445-II, which is supplied ex works with current date and time settings
(CET), operates the receiver in the morning at the pre-programmed switching
time and in the evening at the astro time (sunset).
The TC445-II can be operated manually at any time.
With the TC445-II up to 5 receivers can be operated individually or together.
This device is characterised by its user-friendly operation.
Structural modifications and incorrect installation which are not in accordance
with these and our other instructions can result in serious injuries, e.g. crushing
of limbs. Therefore, structural modifications should only be carried out with our
prior approval and in accordance with our instructions, particularly the informa-
tion contained in these Assembly and Operating Instructions.
Any further processing of the products which does not comply with their intend-
ed use is not permitted.
The end product manufacturer and fitter have to ensure that all the current stat-
utory, official regulations and, in particular, EMC regulations are adhered to dur-
ing utilisation of our products, especially with regard to end product assembly,
installation and customer advice.
Warning
Please keep the instructions in a safe place!
• Use in dry rooms only.
• Use unmodified Becker original parts only.
• Keep persons away from the system guide track.
• Keep children away from controls.
• Please comply with national stipulations.
• Dispose of used batteries properly. Replace batteries by an identical
type (LR 03; AAA) only.
• If the system is controlled using one or several transmitters, the sys-
tem guide track must be visible during operation.
• The equipment contains small parts that could be swallowed.
28
General information

Warranty

Safety instructions