Installing The Wall Mount; Changing The Battery - Becker Centronic TimeControl TC445-II Montage- Und Betriebsanleitung

Assembly and Operating Instructions
Wall holder
Wall holder
m o u n t i n g
plate
4
48
Installing the wall mount
Unlocking
Changing the battery
2
3
1
• Before installing in the position re-
quired, check that the transmitter
and receiver are functioning prop-
erly.
• Fix the mount to the wall with the two
screws provided.
Note
Change the batteries within one
minute, ensuring that you do not
press any buttons during this
time.
1. Open the battery compartment
door.
2. Take out the batteries.
3. Insert the new batteries in the cor-
rect position.
4. Close the cover of the battery com-
partment