Explanations - Becker Centronic TimeControl TC445-II Montage- Und Betriebsanleitung

Assembly and Operating Instructions
Selecting roller shutter
When the roller shutter function is used, the roller shutter remains locked after a
control button has been activated.
Selecting venetian blind
When the venetian blind function is being used, the venetian blind moves in
non¬maintained command mode in order to allow the slats to be positioned
more precisely. If you press and hold a control button for longer than 1 second,
the venetian blind will remain locked.
After the programmed intermediate position respectively lower final position has
been reached, the slats will be automatically adjusted (provided the reverse po-
sition has been programmed).
Manual/Automatic sliding switch
When the sliding switch is switched to " ", only manual control commands are
carried out (e.g. by pressing the UP, STOP and DOWN buttons).
When the sliding switch is switched to "
carried out (e.g. switching time, astro evening function,...)
Channel
The channel of a handheld transmitter can be programmed into one or several
receivers. One or several receivers are controlled via an individual or group com-
mand respectively.
Central command
If all the transmitter channels are selected, all the assigned receivers/receiver
groups can be controlled simultaneously.
Channel selector button
The channel selector button can be used to select up to 5 channels. The indi-
vidual channels are indicated by the respective channel control light being il-
luminated.
If all the channel control lights illuminate simultaneously, the central command
can be programmed or executed.
Note
The programmed channel can be written down in the labelling space
underneath the transparent cover.
Operating mode
The time and the current operating mode, e.g. HOLIDAY, can be seen on the
display.
32

Explanations

", automatic control commands are