Care And Cleaning - Progress PVS1535 Benutzerhandbuch

22 progress
Do not use more than the correct
quantity of detergent. Refer to the in-
structions on the detergent packaging.
Before starting a programme
Make sure that:
• The filters are clean and correctly instal-
led.
• The spray arms are not clogged.

CARE AND CLEANING

Warning! Before maintenance,
deactivate the appliance and
disconnect the mains plug from the
mains socket.
Cleaning the filters
B
Cleaning the spray arms
Do not remove the spray arms.
If the holes in the spray arms are clogged,
remove remaining parts of soil with a thin
pointed object.
• The position of the items in the baskets is
• The programme is applicable for the type
• The correct quantity of detergent is used.
• There is dishwasher salt and rinse aid
• The cap of the salt container is tight.
1. Turn the filter (A) counterclockwise and
C
A
2. To disassemble the filter (A), pull apart
3. Remove the filter (B).
A1
4. Wash the filters with water.
5. Put the filter (B) to its initial position.
A2
6. Assemble the filter (A) and put it into
External cleaning
Clean the appliance with a moist soft cloth.
Only use neutral detergents. Do not use
abrasive products, abrasive cleaning pads
or solvents.
correct.
of load and for the degree of soil.
(unless you use combi detergent tablets).
Dirty filters and clogged spray arms de-
crease the washing results.
Make a check regularly and, if neces-
sary, clean them.
remove it.
(A1) and (A2).
Make sure that it assembles correctly
under the two guides (C).
position in filter (B). Turn it clockwise
until it locks.
An incorrect position of the filters can
cause bad washing results and dam-
age to the appliance.