Before First Use - Progress PVS1535 Benutzerhandbuch

18 progress
6. Press the programme button. The end
indicator goes off.
• The acoustic signals are off.
7. Deactivate the appliance to confirm the
setting.
Activating the acoustic signals
1. Refer to 'Deactivating the acoustic sig-
nals', step (1) through (4).
2. Wait until the programme indicator (A)
goes off. The end indicator is off and

BEFORE FIRST USE

1. Make sure that the set level of the water
softener agrees with the water hardness
in your area. If not, adjust the water
softener. Contact your local water au-
thority to know the water hardness in
your area.
2. Fill the salt container.
Adjusting the water softener
German
degrees
(°dH)
51 - 70
43 - 50
37 - 42
29 - 36
23 - 28
19 - 22
15 - 18
11 - 14
4 - 10
< 4
1) Factory position.
2) Do not use salt at this level.
You must adjust the water softener
manually and electronically.
Water hardness
French mmol/l
degrees
(°fH)
91 - 125 9.1 - 12.5
76 - 90 7.6 - 9.0
65 - 75 6.5 - 7.5
51 - 64 5.1 - 6.4
40 - 50 4.0 - 5.0
33 - 39 3.3 - 3.9
26 - 32 2.6 - 3.2
19 - 25 1.9 - 2.5
7 - 18 0.7 - 1.8
< 7 < 0.7
programme indicator (B) continues to
flash.
• The acoustic signals are off.
3. Press the programme button. The end
indicator comes on.
• The acoustic signals are on.
4. Deactivate the appliance to confirm the
setting.
3. Fill the rinse aid dispenser.
4. Open the water tap.
5. Processing residues can stay in the ap-
pliance. Start a programme to remove
them. Do not use detergent and do not
load the baskets.
Clarke
degrees
64 - 88
53 - 63
46 - 52
36 - 45
28 - 35
23 - 27
18 - 22
13 - 17
5 - 12
< 5
Water softener
adjustment
Manual Elec-
tronic
1) 10
2
1) 9
2
1) 8
2
1) 7
2
1) 6
2
1) 1)
2 5
1 4
1 3
1 2
2) 2)
1 1