Troubleshooting - Silvercrest SDB 2400 A1 Bedienungsanleitung

Troubleshooting

PROBLEM
The appliance does not
function. The control lamp
"Power" does not glow.
After ironing, there are
stains on the textiles
The control lamp "Tempera-
ture" 4 lights up and then
goes out.
It will not produce steam.
SDB 2400 A1
POSSIBLE CAUSE
The plug is not connected to
the mains power supply.
The appliance is damaged.
The soleplate 9 is soiled.
You have poured chemical
additives into the water tank.
You have sprayed laundry
starch onto the fabric.
This is not a defect: the control
lamp "Temperature" 4 in-
dicates the heating up of the
appliance.
The steam regulator 1 is
placed at the position
There is not enough water in
the water tank.
The set temperature is too low
for steam generation.
POSSIBLE
SOLUTIONS
Connect the appliance to
a mains power socket.
In this case, contact
Customer Services.
First carry out a self-
cleaning process and
then clean the iron.
Empty the water tank,
carry out a self-cleaning
process and then fi ll it
with only water as per the
instruction in "Filling with
mains water".
In principle, spray laundry
starch onto the back of the
fabric. Clean the sole of
the iron 9.
-
Adjust the steam regulator
1 to a higher position.
.
Fill the water tank with
water..
Set the temperature regula-
tor 7 to at least level
or higher.
GB
IE
15