Storage And Transport; Reception And Check Of Contents; Packing - FPZ SCL K04 MS-GOR Betriebsanleitung

Failure to comply with the operating
conditions (par. 2.2):
- Ambient temperature outside the limits
or incorrect
- Altitude above 1000 m
- Failure to consider system and filter
pressure losses
Failure to install the filter (for use with
suction in the place)
Operation outside curve (P/Q)
(Pressure /Flow rate)
Rigid connection between the machine
and system
Use of the unit with current values not
corresponding to nominal
Failure to refit the protection devices
(cover plates).
IMPROPER USE LINKED TO MAINTENANCE WORK
Failure to clean the filter
Failure to eliminate of layers of surface
dust
Failure to check parts subject to wear
(seals, flexible couplings, etc.)
FAULT CONDITIONS / EMERGENCY CONDITIONS
Not stopping the machine when making an
abnormal noise.

11 STORAGE AND TRANSPORT

11.1

RECEPTION AND CHECK OF CONTENTS

•
Upon receipt of the unit, check that the packaging is intact and without signs of damage
due to transport or storage conditions.
•
If the packaging is damaged, immediately notify the forwarder and the manufacturer.
•
Always check that the material received matches that specified in the consignment note.
11.2

PACKING

Depending on its size and weight, the unit is packed in the following ways:
•
in a single box;
•
on wooden platform with cardboard covering;
•
in a wooden crate;
The wood of the platforms, pallets and crates can be reused or recycled in accordance with the current
laws in the country where the unit is installed. Other materials, such as cardboard, plastic or protective film,
must be disposed of in accordance with local regulations.
FPZ-MI-K MS-GOR/GVR-EU-R00-15
Machine performance different from the
data given, possible motor faults and
seizing of the impeller
Particles entering the blower with seizing
of the impeller
Machine performance different from the
data given, possible motor faults and
seizing of the impeller
Abnormal vibrations for the machine
and/or system with possible seizing of the
impeller.
Possible overheating of the machine and
motor when powered by an inverter.
Operator coming into contact with moving
parts.
Seizing of the impeller
Machine overheating
Machine performance different from the
data given.
Damage with possible seizing of the
impeller, machine overheating
possible motor damage.
40 / 122
RISK FOR THE MACHINE
RISK FOR THE MACHINE
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE
RISK FOR THE OPERATOR
RISK FOR THE MACHINE
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE, SYSTEMS
AND OPERATORS
RISK FOR THE MACHINE, SYSTEMS
and AND OPERATORS