Installation And Operating Instructions - Wilo Drain TSW serie Einbau- Und Betriebsanleitung

Installation and operating instructions

1 General
About this document
These installation and operating instructions are
an integral part of the product. They must be kept
readily available at the place where the product is
installed. Strict adherence to these instructions is
a precondition for the proper use and correct
operation of the product.
These installation and operating instructions cor-
respond to the relevant version of the product and
the underlying safety standards valid at the time
of going to print.
2 Safety
These operating instructions contain basic infor-
mation which must be adhered to during installa-
tion and operation. For this reason, these
operating instructions must, without fail, be read
by the service technician and the responsible
operator before installation and commissioning.
It is not only the general safety instructions listed
under the main point "safety" that must be
adhered to but also the special safety instructions
with danger symbols included under the following
main points.
2.1 Indication of instructions in the operating
instructions
Symbols:
General danger symbol
Danger due to electrical voltage
USEFUL INFORMATION
Signal words:
DANGER!
Acutely dangerous situation
Non-observance results in death or the most
serious of injuries.
WARNING!
The user can suffer (serious) injuries. 'Warning'
implies that (serious) injury to persons is proba-
ble if this information is disregarded.
CAUTION!
There is a risk of damaging to the pump/installa-
tion. 'Caution' implies that damage to the prod-
uct is likely if the information is disregarded.
NOTE: Useful information on using the product. It
draws attention to possible problems.
Installation and operating instructions Wilo-Drain TS/TSW
2.2 Personnel qualifications
The installation personnel must have the appro-
priate qualifications for this work.
2.3 Danger in the event of non-observance of the
safety instructions
Non-observance of the safety instructions can
result in risk of injury to persons and damage to
pump/installation. Non-observance of the safety
instructions can result in the loss of any claims for
damages.
In detail, non-observance can, for example, result
in the following risks:
• Failure of important functions of the pump/instal-
lation,
• Failure of specified maintenance and repair proce-
dures,
• Risks to persons through electrical, mechanical
and bacteriological effects,
• Property damage.
2.4 Safety instructions for the operator
The existing directives for accident prevention
must be adhered to. Danger from electrical current
must be eliminated. Local directives or general
directives [e.g. IEC, VDE etc.] and local power sup-
ply companies must be adhered to.
Risks through mechanical or bacteriological
effects must be prevented. Local conditions and
guidelines relating to sewage technology must be
adhered to.
2.5 Safety instructions for inspection and
installation work
The operator must ensure that all inspection and
installation work is carried out by authorised and
qualified personnel, who are sufficiently informed
from their own detailed study of the operating
instructions.
Work to the pump/installation must only be car-
ried out when at a standstill.
2.6 Unauthorised modification and manufacture of
spare parts
Modifications to the pump/installation are only
permissible after consultation with the manufac-
turer. Original spare parts and accessories author-
ised by the manufacturer ensure safety. The use of
other parts can nullify the liability from the results
of their usage.
2.7 Improper use
The operational safety of the supplied pump/unit
is only guaranteed for conventional use in accord-
ance with section 4 of the installation and operat-
ing instructions. The limit values must on no
account fall under or exceed those specified in the
catalogue/data sheet.
English
11