Werbung
Verfügbare Sprachen
Verfügbare Sprachen
On-site installation
Installation work must be carried out only by a qualified technician. We will bear no
liability for defective installation.
The ceiling unit for vertical hanging weighs approx. 15 kg (33.1 lbs) and that for inclined
hanging (at an angle of 5, 10, 15, or 20 degrees) weighs approx. 37 kg (81.6 lbs).
For the mass of the display to be installed on the ceiling unit, refer to the instruction
manual for the Plasma Display.
When installing the ceiling unit, always support its weight with four or more wire ropes
etc. and install two or more other wire ropes so as to prevent the unit from falling down
onto personnel in the site even if it should come off. Besides, install a swing stop
according to the circumstance.
Vertical hanging
Suspend
Fall
Suspend
prevention
Swing stop
Caution
• After the completion of installation, unscrew the eyebolt at the top center of the Plasma Display and fit an eyebolt
cap in the hole.
Removing the display
Reverse the installation procedure to remove the display.
Caution
• Because the display is heavy, handle it carefully by the use of lifting equipment (machine).
Suspend
Fall
Suspend
prevention
Swing stop
Inclined hanging
Suspend
Suspend
Fall
prevention
Swing stop
Suspend
Suspend
Fall
prevention
Swing stop
21
Werbung
