Safety; Intended Use - WIKA TC90 Betriebsanleitung

1. General information / 2. Safety
DANGER!
... identifies hazards caused by electrical power. Should the safety instructions
not be observed, there is a risk of serious or fatal injury.
WARNING!
... indicates a potentially dangerous situation that can result in burns caused by
hot surfaces or liquids, if not avoided

2. Safety

WARNING!
Before installation, commissioning and operation, ensure that the appropriate
thermometer has been selected in terms of measuring range, design and
specific measuring conditions.
Non-observance can result in serious injury and/or damage to the equipment.
Further important safety instructions can be found in the individual chapters of
these operating instructions.

2.1 Intended use

This high-pressure thermocouple serves for temperature measurement in industrial
applications.
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly. Use with abrasive media is not allowed.
The technical specifications contained in these operating instructions and all
accompanying documents must be observed. Improper handling or operation of the
instrument outside of its technical specifications can cause permanent damage to
the instrument and requires the instrument to be taken out of service immediately and
inspected by an authorised WIKA service engineer.
If the instrument is transported from a cold into a warm environment, the formation of
condensation may result in instrument malfunction. Before putting it back into operation,
wait for the instrument temperature and the room temperature to equalise.
The manufacturer shall not be liable for claims of any type based on operation contrary to
the intended use.
WIKA operating instructions model TC90
GB
5