Connecting The Controller / Hand Switch; Operating The External Controller - RK RKSlimlift Montageanleitung

7.5 Connecting the controllers/hand switches
You can connect the following external controllers to the lifting column:
Controller
MultiControl mono connection C
MultiControl duo
MultiControl quadro
Transformer controller 120 VA
connection C
MultiControl II
The lifting column is connected to the external controller. The controller is not in the lifting
column.

7.5.1 Operating the external controller

The hand switch is not connected to the lifting column, it is connected to the controller.
For the operation of the controller and hand switch, please refer to the respective assembly
instructions.
Use only the controllers listed in this operating instruction.
This may otherwise lead to damage to the lifting columns or controllers.
Ensure that nobody is in the vicinity of the drives when they are moving.
Therefore, only use the hand switch if you can see the drives - risk of accident!
Lifting column connection
DIN plug, round
DIN plug, round
DIN plug, round
DIN plug, round
Mini-Fit Jr. (rectangular)
7. Life phases
43