MA lighting dot2 Kurzanleitung Seite 32

Connectivity
RJ45 Ethernet socket Connect a PC /Laptop or dot2 console
4 x DMX OUT (XLR 5 pin)
100 – 240 V~ 50/60 Hz Automatic operation, no switching necessary! A C13 / C14
Power
connector is required. The cable must be fitted with a shock-proof plug and must
meet the local requirements.
Main switch to turn on or off the device
MENU –button
to switch the menu
dot2
Node4
Data
Transport
Safety
Instructions
Limitation
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
31