Intended Use - MA lighting dot2 Kurzanleitung

Intended Use

The complete dot2 family is intended for control
moving lights, LEDs, video and media
without the written consent of MA Lighting Technology GmbH.
The dot2 Node4 is a special form within the dot2 product range. The device can only be operated
connected to a dot2 onPC software that must be installed on a PC or laptop, or connected to a dot2
console.
Transport, operation and maintenance must be performed only by persons who are qualified for the
activity. The safety and operating limits must be respected at all.
Manufacturer:
For more information and detailed manuals see: www.malighting.com Please check our Frequently
Asked Questions first, that you can find online at www.malighting.com.
If there are any questions left, just send us an e-mail with your contact details and subject
information support@ma-dot2.com. This E-Mail Service is monitored during MA Lightings regular
business hours in Germany. For emergency services please contact your local distributor.
of all kinds of lighting genres such as conventionals,
via DMX signal. And may not be used for any other purpose
MA Lighting Technology GmbH
Dachdeckerstraße 16
D – 97297 Waldbüttelbrunn
Germany
dot2
Node4
Data
Transport
Safety
Instructions
Limitation
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
23