MA lighting dot2 Kurzanleitung Seite 23

The dot2 Node4 converts data transmitted over Ethernet to DMX512 signals to control lights.
Optimised for touring and installations purposes, both have a rugged steel housing for a long life even
under harsh conditions. The front panel offers a menu button and a 2" colour TFT. The mains switch is
located on the back, along with the power connector, as well as four DMX ports.
Furthermore dot2 Node4 can be combined with the dot2 onPC and the dot2 console range.
dot2
Node4
Data
Transport
Safety
Instructions
Limitation
Quickstart
Connect
Quickstart
ON / OFF
Maintenance
Conformity
22