Appendices; Technical Specifications - Eaton EX 2200 RT 2U Installations- Und Bedienungsanleitung

6. Appendices

6.1 Technical specifications

Output power
Electrical supply network
Rated input voltage
Input voltage range
Frequency
Power factor
Leakage current
Load output
Voltage
Frequency
Harmonic distortion
Overload capacity
Current
Battery
Environment
Operating temperature range
Relative humidity
Storage temperature range
Altitude
Noise level
(1) Depending on the output voltage selected: 200V / 208V / 220V / 230V / 240V, the output power is
1980VA / 1980VA / 2200VA / 2200VA / 2200VA.
(2) Depending on the output voltage selected: 200V / 208V / 220V / 230V / 240V, the output power is
2700VA / 2700VA / 3000VA / 3000VA / 3000VA.
(3) Standard output power is 2700 W, 2400 W with an EXB module.
(4) Values for 33% / 66% / 100% of UPS output.
(5) Programmable: 200V / 208V / 220V / 230V / 240V using the UPS Config software.
(6) Frequency-converter mode is programmable using the UPS Config software.
(7) Depending on the output voltage selected: 200V / 208V / 220V / 230V / 240V, the maximum output current is
9.9A / 9.5A / 10A / 9.6A / 9.2A.
(8) Depending on the output voltage selected: 200V / 208V / 220V / 230V / 240V, the output current is
13.5A / 13A / 13.6A / 13A / 12.5A.
34007776EN/AD - Page 22
EX 2200 EX 3000
(1)
2200 VA / 3000 VA
1980 W 2700 W
Single phase 230 V
110 / 140 / 200 V to 284 V
50/60 Hz (autoselection)
> 0.95
< 2 mA
Single phase 230 V ±3%
50/60 Hz ±0,5%
< 4% for linear load,
< 6% for nonlinear load
102% continuous, 105% 20s, > 130% 1.5s
(7)
9.6 A
6 x 12V - 7 Ah, 6 x 12V - 9 Ah,
sealed lead acid, sealed lead acid,
maintenance free maintenance free
20% to 90% (without condensation)
< 46 dBA
EX 3000 XL
(2) (2)
/ 3000 VA /
(3) (3)
2700 W
(4)
(5)
(6)
(8)
13 A
without internal
battery
0°C to 40°C
-25°C to 40°C
1000 m
< 50 dBA
EX EXB
Two 6 x 12 V - 9 Ah
strings, sealed
lead acid,
maintenance free