Switching Off - Silvercrest SIKP 2000 B2 Bedienungsanleitung

Switching off
GB
38
■ The appliance switches off , ...
–
if, within 30 seconds of switching on, you do not select any further func-
tion,
–
if you activate the button On/Off 5 once again, also when it is in
actual use.
NOTICE
► In standby mode, that is, after switching off or before switching on, an "- L-"
or an "- H -" appears in the display 8. This heat indicator means:
–"- L -" = "Low" - Temperature the cooking area 1 < 60°C
or
–"- H -" = "High" - Temperature the cooking area 1 > 60°C
■ For safety reasons, the cookware recognition feature switches the appliance
off automatically when you ...
–
remove the cookware from the cooking area 1 for longer than 15
seconds, or do not place one there..
–
Although the energy fi eld is immediately switched off with short-term
cookware removals - the selected function remains, however, active.
Around every 3 seconds a signal tone issues a reminder that, in roughly
15 seconds, the appliance will switch itself off automatically. If you re-
place the cookware back onto the cooking area 1 within 15 seconds,
the selected function will continue on the same settings.
NOTICE
► As soon as you take the cookware from the cooking area, "Err" fl ashes in
the display.
The cooking area 1 also switches itself off after 120 minutes of continuous
■
use, should you not have entered in any new settings in the meantime.
SIKP 2000 B2