Unpacking; Items Supplied; Placement; Utilisation - Silvercrest KH1241 Bedienungsanleitung

Unpacking

Before taking the appliance into use check to ensure
that ...
• the appliance is undamaged, and also the power
cable with plug 0.
• all packaging materials are removed from the
appliance. Preserve the packaging so as to be
able to store the appliance under protection or
to transmit it through the post, e.g. for repairs.

Items supplied

After unpacking, check to ensure all items are avai-
lable. Being supplied are:
1 x Induction cooker
1 x Operating instructions

Placement

So as not to overheat, the appliance requires unre-
stricted ventilation. Therefore, position the appliance
such that ...
• there is an all-round free space of minimum
10 cm, e.g. to the nearest wall,
• a free space directly above of minimum 60 cm,
e.g. to a suspended wall cabinet.
For cooling, the appliance draws in air through the
openings on the underside.
• Therefore, place it only on firm and smooth sur-
faces, not on textiles or fluffy surfaces, such as
tablecloths.
• Do not place it adjacent to curtains, drapes or
other textiles that, due to the airflow, could press
themselves against the appliance.

Utilisation

When you have unpacked and positioned the ap-
pliance as described above, it is now ready for use.

a) Placing cooking vessels

• Place the cooking vessel in the middle of the hob 1.
This may ...
- not project over the edge of the hob 1 and ...
- not weigh more than 10 kg (together with its
contents).

b) Switching on

When cookware with content is standing on the
hob 1:
• Insert the plug 0 into a power socket. A signal
tone sounds and the control lamp 8 glows. The
appliance is now ready for use.
• Press the button On/Off 9. The control lamps
3/4 blink and a signal tone sounds.
The appliance is now ready for use.

c) Switching off

The appliance switches off, ...
• if, within 30 seconds of switching on, you do not
select any further function,
• if you activate the button On/Off 9 once again,
also when it is in actual use.
For safety reasons, the cookware recognition feature
switches the appliance off automatically when you ...
• remove the cooking vessel from the hob for longer
than 15 seconds, or do not place one there.
• Although the energy field is immediately switched
off with short cookware removals, the selected
function remains active. Around every 3 seconds
a signal tone issues a reminder that in roughly
15 seconds the appliance will switch itself off
automatically.
The hob 1 also switches itself off after 180 minutes
of continuous use should you not have entered in
any new settings in the meantime.
- 24 -