Dell PowerApp 100 Rack-Installationsanleitung Seite 14

1-6 Rack Installation Guide
inner mounting rails (2)
flush-mount brackets (2)
10-24 x 0.25 inch flat-
head Phillips screws (4)

 $   
#   

      
You need the following tools and supplies to install the system in a two-post open-
frame relay rack:
•
#2 Phillips screwdriver
•
Masking tape or a felt-tip pen, for use in marking the mounting holes to be used
1-U template
12-24 x 0.5-inch pan-
head Phillips screws (4)