Standard Accessories - Hitachi CN 18DSL Bedienungsanleitung

English
○ Do not place conductive debris, nail and wires such as
iron wire and copper wire in the storage case.
○ To prevent shorting from occurring, load the battery in
the tool or insert securely the battery cover for storing
until the ventilator is not seen.
REGARDING LITHIUM-ION BATTERY
TRANSPORTATION
When transporting a lithium-ion battery, please observe the
following precautions.
WARNING
Notify the transporting company that a package contains a
lithium-ion battery, inform the company of its power output
and follow the instructions of the transportation company
when arranging transport.
○ Lithium-ion batteries that exceed a power output of
100Wh are considered to be in the freight classifi cation
of Dangerous Goods and will require special application
procedures.
○ For transportation abroad, you must comply with
international law and the rules and regulations of the
destination country.
Power Output
2 to 3 digit number
SYMBOLS
WARNING
The following show symbols used for the machine.
Be sure that you understand their meaning before
use.
CN18DSL : Cordless Nibbler
Read all safety warnings and all instructions.
SPECIFICATIONS
Model
Voltage
Mild Steel plate (400 N / mm
Cutting capacity Stainless steel plate (600 N / mm
Aluminium plate (200 N / mm
Number of strokes at no load
Minimum cutting radius
Width of nibbling groove
Weight *
* According to EPTA-Procedure 01/2003
NOTE
Due to HITACHI's continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
Wh
)
2
2
Always wear eye protection.
Only for EU countries
Do not dispose of electric tools together with
household waste material!
In observance of European Directive 2002/96/
EC on waste electrical and electronic equipment
and its implementation in accordance with
national law, electric tools that have reached
the end of their life must be collected separately
and returned to an environmentally compatible
recycling facility.
V Rated voltage
min Revolution or reciprocations per minute
-1
Switching ON
Switching OFF
Warning
Disconnect the battery
Battery capacity
Remaining battery indicator switch
The battery remaining power is nearly empty.
Recharge the battery soonest possible
The battery remaining power is a half.
The battery remaining power is enough.

STANDARD ACCESSORIES

In addition to the main unit (1 unit), the package
contains the accessories listed on page 173.
Standard accessories are subject to change without notice.
APPLICATIONS
Cutting and pocket cutting mild steel, stainless steel, copper
and aluminium plates corrugated plates and trapezoidal
plates.
)
2
)
4
CN18DSL
18 V
1.6 mm
1.2 mm
2.3 mm
2500 min
–1
40 mm
5 mm
2.1 kg (BSL1850)