Conceptronic C54APRA2+ Schnellstartanleitung Seite 47

ENGLISH
6.1 Security = WPA
When WPA is selected as security level, you will see the following options:
2
1. Select the type of WPA Security for your Wireless Network ("WPA", "WPA2" or
"AnyWPA") ("AnyWPA" means both WPA & WPA2 clients can connect).
2. Set the security option to "Pre-Shared Key".
3.
Enter a pass phrase in the PSK-String field.
Note: Remember or write down the entered pass phrase. You will need it when you
want to configure a Wireless Client to connect to the C54APRA2+/C54APRB2+!
4. Click "Apply" to save the settings.
Note: After the Wireless Security is configured, the C54APRA2+/C54APRB2+ needs to
be rebooted. Please continue to "Chapter 8" for reboot instructions.
After reboot your C54APRA2+/C54APRB2+ is ready to use!
4
47
1
3