Conceptronic C54APRA2+ Schnellstartanleitung Seite 35

ENGLISH
4.2 Connect to the C54APRA2+/C54APRB2+
For LAN Cable Users:
Connect the LAN Cable to 1 of the 4 LAN ports on the back panel of the
C54APRA2+/C54APRB2+ and to the Network Card in your computer.
The LAN LED of the used LAN port will turn on, indicating that the computer is
connected. (Your LAN Connection must be enabled and your computer turned ON).
You can now proceed to Chapter 4.3 to check your connection or to Chapter 5 to
configure the C54APRA2+/C54APRB2+.
For Wireless Users:
Note: Almost every brand/type Wireless Card uses a different Client application.
Please check the manual of your Wireless Card for information how to create
a connection with a Wireless Network.
The example below is using the standard Microsoft Wireless Client, which is
integrated in Windows XP with Service Pack 2.
1. Right click the Wireless
Network Icon in your
System tray and select
"View Available
Wireless Networks".
2. Select the Network
"Conceptronic" from
the list of available
Wireless Networks and
click "Connect".
2
35
1
2