Conceptronic C54APRA2+ Schnellstartanleitung Seite 33

ENGLISH
4. Configure your computer(s) for use with the Router & Modem
4.1 Configure your IP address
The C54APRA2+/C54APRB2+ is equipped with a build-in DHCP Server. The DHCP Server
will automatically assign an IP address to a connected computer if the connected
computer is set to "obtain an IP address automatically".
To configure your computer for Automatic IP follow the instructions below:
1. Click "Start"
2. Enter the command
"NCPA.CPL" and press "OK".
The Network Connections window will appear.
3. Right click your "Local Area
Connection" (Wired or Wireless,
depending on the connection you use)
and select "Properties".
"Run".
2
3
33
2