Fault Causes And Rectification; Disposal; Appendix; Technical Data - Silvercrest SUR 46 C2 Bedienungsanleitung

Fault causes and rectification
The following table will help you to identify and rectify minor malfunctions:
Malfunction Possible cause
The appliance
The plug is not connected to the
does not func-
mains.
tion.
The display
lights up but
the appliance The appliance is not switched on.
does not
clean.
NOTE
► If the above-mentioned solutions do not resolve the problem, please contact
Customer Service (see chapter Service).

Disposal

Never dispose of the appliance in normal domestic waste.
This product is subject to the provisions of the European WEEE
(Waste Electrical and Electronic Equipment) Directive 2012/19/EU.
Dispose of the appliance via an approved waste disposal company or your
municipal waste disposal facility. Please observe applicable regulations. Please
contact your waste disposal facility if you are in any doubt.

Appendix

Technical data

General
Input voltage
Mains voltage frequency
Output
Oscillation frequency
Protection class
SUR 46 C2
Remedy
Insert the power plug into the socket.
Switch the appliance on by pressing
the ON button.
2
220–240 V ~
50/60 Hz
50 W
approx. 46 kHz
II /
GB
15