Parkside PWS 230 B2 Originalbetriebsanleitung Seite 9

speed could disintegrate or fly off.
e) The external diameter and the thickness of the
attachment must be compatible with the dimen-
sions of your electrical power tool. Attachments
that are not dimensionally compatible cannot be
adequately guarded or controlled.
f) Threaded mounting of accessories must match
the grinder spindle thread. For accessories
mounted by flanges, the arbour hole of the
accessory must fit the locating diameter of the
flange. Attachments that do not exactly fit on
the spindle turn unevenly, vibrate severely and
could lead to loss of control.
g) Do not use damaged attachments. Before
every use check attachments such as grind-
ing discs for loose fragments and cracks,
grinding wheels for cracks, deterioration or
excessive wear and wire brushes for loose or
broken wires. If the electrical power tool or
attachment is dropped, inspect for damage
or change the attachment for an undamaged
one. When you have inspected and inserted
the attachment, position yourself and by-
standers away from the plane of the rotating
attachment and run the device at maximum
speed for one minute. Damaged attachments
will usually break apart during this test.
h) Wear personal protective equipment. Use
a full face visor, safety goggles or safety
glasses, depending on the application. Wear
a dust mask, hearing protectors, safety
gloves or special apron capable of stopping
particles of the grinding medium or work-
piece, as appropriate for the task. Eyes must
be protected from the flying debris which can
arise from some operations. Dust or breathing
masks must be capable of filtering out the dust
generated by the application. Prolonged expo-
sure to loud noise can lead to hearing loss.
i) Keep bystanders at a safe distance from your
work area. Anyone entering the work area
must wear personal protective equipment.
Fragments of the workpiece or of a broken at-
tachment could fly off and cause injury beyond
the immediate working area.
j) Hold the device by the insulated handle sur-
faces when you are undertaking work where
there is the danger of the attachment striking
PWS 230 B2
hidden electricity cables or the device's mains
lead. Contact with a live wire could cause
metal parts of the device to become live and
lead to electric shock.
k) Keep the power cord away from rotating
attachments. If you lose control of the device the
mains lead may become severed or trapped and
your hand or arm may be pulled into the rotating
attachment.
l) Never lay the electrical power tool down until
after the attachment has come to a complete
standstill. The rotating attachment may snag
when it comes into contact with the surface and
cause you to lose control of the device.
m) Do not have the electrical power tool running
while you are carrying it. Your clothing could
become trapped by unintentional contact with
the rotating attachment and the tool could be
pulled into your body.
n) Clean the ventilation slots on your electrical
power tool regularly. The motor's fan draws
dust into the housing. A build-up of metal dust
could give rise to an electrical hazard.
o) Never use the electrical power tool near in-
flammable materials. Sparks could ignite these
materials.
p) Do not use attachments that require the use
of coolants. The use of water or other liquid
coolants could result in electric shock.
GB
IE
5