WimTec SanTec OCEAN W7 Montage- Und Bedienungsanleitung Seite 28

EN
Program description
Fully automatic program mode:
DIP switch 1=ON, 2=ON
15 - 50 cm
Switch on
As soon as you enter the
sensor range (preset to
30 cm), the ON/OFF icon will
illuminate and the water flow
will start automatically.
If your hands frequently leave the sensor range while washing your hands, for example,
causing the water flow to stop prematurely, you can extend the shut-off delay to 2 s.
When using an instantaneous water heater, the configured shut-off delay helps to
minimise the number of ignition processes.
DIP switch 6 ON = Extended shut-off delay – 2 s
DIP switch 6 OFF = Standard shut-off delay – 1 s (default setting).
28 Wall tap control
OCEAN W7
User detection
When you step in front of the
wall fitting, the system will
detect you. The illuminating
icon begins to pulse slowly.
Switch off
Once you clear the sensor
range or after the configu-
red shut-off delay time (DIP
switch 6) has elapsed, the
water will stop.
You can alternatively stop the
flow of water manually by
tapping the ON/OFF icon.
SanTec OCEAN W7
Werkseinstellung:
ON
OFF
1 2 3 4 5 6
ON
OFF
1 2
ON
OFF
1 2
ON
OFF
1 2
ON
OFF
1 2
Safety flow arrest
After the configured water
arrest time has elapsed, the
water flow will automatically
stop to prevent unintentional
continuous activation.
ON
OFF
1
ON
OFF
1
3 4 5 6
ON
OFF
1
3 4 5 6
ON
OFF
3 4 5 6
1
3 4 5 6