EN
Assembly
1
4
!
ATTENTION!
Perform the following steps
in the order indicated!
22
Wall tap control
OCEAN W7
2
5
1.
Close the main water valve.
2.
Remove the flush-mount protective cover.
3.
Cut off protruding parts from the flush-mount box so it aligns
with the tiles.
4.
Where necessary, seal off space between wall and flush-
mount set with silicone.
5.
Unscrew both mounting clips with a screwdriver until they
align with the tiles.
6.
Remove the outlet dirt cover.
SanTec OCEAN W7
3
6