EN
Bringing the front plate into a level position.
A
D
A
Open the Allen screw at the bottom of the chrome spout
and remove the spout. Next, carefully remove the front
plate using a screwdriver (click-lock system).
B
Unscrew the mounting clip using a screwdriver.
C
Flip the mounting clip 180°.
D
Feed the screw into the rear opening.
E
The mounting clip's nose points downwards – adjust
1 mm downwards – fasten the mounting clip again,
until it aligns with the tiles.
F
The mounting clip's nose points upwards – adjust 1 mm
upwards – fasten the mounting clip again, until it aligns
with the tiles.
26
Wall tap control
OCEAN W7
B
E
SanTec OCEAN W7
C
F
Mounting clip:
Can be turned into any direc-
tion and then inserted into the
guide rail.
Nose points
downwards
Nose points
upwards
Nose in
centre position
Nose in
centre position