Initial Use; Package Contents And Transport Inspection; Disposal Of The Packaging - Silvercrest SWW 1500 A1 Bedienungsanleitung

Initial use

GB

Package contents and transport inspection

Disposal of the packaging

6
The device is delivered with the following components as standard:
▯ Thermal wave heater
▯ Remote control
▯ 2 Batteries type AAA/Micro
▯ 2 Pedestals with securing screws
▯ 4 Wall brackets (U shaped)
▯ 1 Angle bracket (Z shaped)
▯ 5 Rawlplugs S8
▯ 5 Screws M4 x 42 mm
▯ 7 Screws M4 x 13 mm
▯ This operating manual
NOTICE
► Check the contents to ensure that everything is present and for signs of visible
damage.
► If the contents are not complete or are damaged due to defective packaging
or through transportation contact the service hotline (see service).
The packaging protects the device from transport damage. The packaging materials
are selected from the point of view of their environmental friendliness and disposal
technology and are therefore recyclable.
The recirculation of packaging into the material circuit saves on raw material
and reduces generated waste. Dispose of packaging material that is no longer
needed according to the regionally established regulations.
NOTICE
► If possible preserve the device's original packaging during the warranty
period so that in the case of a warranty claim you can package the device
properly for return.
Initial use
SWW 1500 A1