Assembly; Stationary Assembly; Wall Mounting - Silvercrest SWW 1500 A1 Bedienungsanleitung

Assembly

Assembly
CAUTION
► For assembly place the device on a soft underlay such as, for example,
a carpet in order to avoid damages.

Stationary assembly

♦ Fold the carrying handle
underside upwards, on a soft underlay.
♦ Assemble the pedestals
Pedestal assembly).
Diagram Pedestal assembly

Wall mounting

WARNING
► Make sure that when you are drilling you do not damage any electrical
wires or other installations in the wall such as water pipes.
► The supplied rawlplugs are only suitable for a mounting on concrete or
stone. Before starting the installation, please check your installation location
carefully for its suitability for the rawlplugs. If in doubt, call a professional.
NOTICE
► When selecting the mounting location make sure that a suitable mains wall
socket is located within the plug-in radius of the mains power cord.
SWW 1500 A1
backwards and place the device with the
10
with both screws
8
A
8
to the device (see diagram
A
10
GB
9