Initial Operation - Silvercrest SWKT 3000 A1 Bedienungsanleitung

Initial operation

WARNING – RISK OF INJURY!
► Only use fresh drinking water in the kettle! Do not consume any water
that is not certifi ed as drinkable. If you do, you are taking a risk with your
health!
Before starting to use the appliance, ensure that ...
–
–
1) Open the lid 1 by pressing on the lid release button 2.
2) Fill the appliance with water up to the MAX mark and let it come to a full
boil once – as described in the next section.
3) After it has boiled, pour this water away.
4) Rinse the kettle out with clear water.
5) Fill the appliance with water once again, up to the MAX mark, and then
bring it to boil. When done, pour this water away also.
6) Rinse the kettle out with clear water.
The appliance is now ready for use.
SWKT 3000 A1
the appliance, power plug and power cord are in proper condition
and ...
all packaging materials have been removed from the appliance.
GB
IE
CY
7