Configuration Procedures - Herth+Buss AirGuard Handbuch

Operating Instruction

10.0 Configuration procedures

EN
Instructions for the correct OBD-II configu-
ration procedure for the following vehicles
built in 2015 and 2016:
Mitsubishi ASX, Outlander, Spacestar/
Mirage, i-MiEV, Pajero
Suzuki Vitara
Citroen C4 S-Cross
Peugeot 4008
Please note:
Triggering = Activation/Readout
Auto Off = See Settings
www.herthundbuss.com
IMPORTANT
Theconfigurationproceduremay
last a few minutes. This is regardless
of how long the "triggering" process
takes.
In order to avoid errors, please
switch off the "Auto Off" function
on the AirGuard. If the AirGuard
turnsoffduringtheconfiguration
procedure, this procedure will be
interrupted and the vehicle will
displaythemessage"Maintenance"
in the instrument cluster.
Furthermore, the start button for
the ACC ignition will be blocked. To
rectifythiserror,pleasedisconnect
theOBDIImodulecompletelyfrom
the vehicle, close all doors and lock
the vehicle. Then unlock the vehicle
and connect the OBD II module
oncemore.Ifyoutrytoreadoutthe
vehicle'ssensorIDatthisstage,you
willonlysee"FFFFFFFF"displayed.
Thisistheresultoftheconfiguration
procedure being interrupted before.
95990001
80