General; Area Of Application; Performance Data - Herth+Buss AirGuard Handbuch

Operating Instruction

1.0 General

1.1. Area of application

The AirGuard is a TPMS diagnostic device.
It allows work to be carried out directly on
the vehicle whilst offline. The vehicle da-
tabase with a coverage of 93% is stored in
the device itself. Updates are available free
of charge from our website. The AirGuard is
able to read out all sensor types found on
themarket.Then,itisabletoautomatically
or manually duplicate the read data to the
Herth+Buss wheel sensors. Programming a
new sensor ID and wireless reprogramming
of the sensor ID of activated Herth+Buss sen-
sors while still installed is also possible.
Readoutofown/third-partysensorsin
accordance with own vehicle database
Programming of Herth+Buss wheel
sensors in accordance with own vehicle
database
free updates
Vehicle coverage of 93%
vehicle data stored in the device itself
NOTE
Please ensure that the latest soft-
wareupdateisinstalledonyour
device. See page 25 for a detailed
guide.
47

1.2. Performance data

The following functions are available:
calling up of sensor data
(temperature,pressure,battery)
readingoutofspecificsensorID
various programming functions for
the Herth+Buss wheel sensor
OBD II functions in conjunction with the
additional module 95990003
Please note:
Wheel sensors must be held at a
distance of 5-15 cm, parallel to the left
or right antenna.
Radio frequency:
95990001
EN
433 Mhz