Herth+Buss AirGuard Handbuch Seite 68

Operating Instruction
Scanning the object ID:
Position the AirGuard in parallel with the
EN
sensor of the OE or object sensor. Press the
enter key to diagnose the sensor ID of the
OE sensor.
Copying the ID to the sensor:
TheAirGuarddisplaystheIDoftheOEsen-
sor. Position the AirGuard in parallel with the
sensorandpresstheEnterkeytocopythis
ID to the target sensor.
www.herthundbuss.com
Please note:
The target sensor should use the same
vehicle protocol as the OE sensor. As
soon as you have called up the sensor
ID, press the enter button to copy
directly to the target sensor. Pressing
the BACK button deletes the sensor ID
and the diagnosis must be repeated.
Modification complete:
The AirGuard will now modify the target
sensorforyou. Y ouwillheartwoshortbeeps
afterthesensorhasbeensuccessfullymodi-
fied.
95990001
68