Generating An Unused Sensor (Setting Wheel: 1) - Herth+Buss AirGuard Handbuch

Operating Instruction
4.4 Generating an unused sensor
(setting Wheel: 1)
EN
This function makes it possible to program
a sensor for all the vehicles supported in the
device which support automatic reteaching.
Please note:
The programming function only works
with the Herth+Buss wheel sensor.
Other sensors cannot be written.
NOTE
The Herth+Buss wheel sensor is
locked in the sensor compartment
and generated from the AirGuard's
database. This provides both an
IDandaspecificvehicleprotocol.
The sensor must be locked for all
applications.
Herth+Bussrecommendsalways
checking the control unit with an
OBD II-capable diagnostic tool, in
order to delete TPMS faults or to
reteach the control unit.
www.herthundbuss.com
Function selection:
Use the arrow buttons to select PROGRAM
BLANK SENSORandpresstheenterkeyto
select.
After selecting the function "AUTO DUPLI-
CATE", it is possible to implement "WIRE
PROGRAMMING" by locking the sensor
in position in the sensor compartment or
"WIRELESS PROGRAMMING" by holding
the sensor in parallel with the device. This
alsoworkswithnotyetactivatedHerth+Buss
wheelsensorsalreadyfittedinthetyre.
95990001
60