Manually Duplicating An Oe Sensor - Herth+Buss AirGuard Handbuch

Operating Instruction

4.3 Manually duplicating an OE sensor

EN
Please note:
The duplication and programming
function only works with the
Herth+Buss wheel sensor.
Other sensors cannot be written.
Perform the steps described in 4.1.
Function selection:
Use the arrow buttons to select MANUAL
DUPLICATEandpresstheenterkeytoselect.
OE ID locator:
UsetheFINDOEIDfunctiontohelpyoufind
the sensor ID for an OE sensor. Press the en-
terkeytoselect.
www.herthundbuss.com
NOTE
Theprocessofmanuallyreadingthe
correctsensorIDonlyworkswithOE
sensors. An installed universal sensor
cannotnormallyhavethecorrectID
printed on it.
Manufacturer selection:
Use the arrow buttons to select the sensor
manufacturer.Presstheenterkeytoselect.
Please note:
You can see the number of different
sensor types from which you can select
in the bottom right corner (e.g. 1/1).
Find OE ID:
TheAirGuardwillshowyouwheretheIDis
located. Certain manufacturers may have
severalsensortypes.Usethearrowbuttons
to browse between the sensor types, or
press the BACK
95990001
button to go back.
58