Use Of The Device; Switching The Endoscope Camera On And Off; Lighting; Screen Brightness - Powerfix PEK 2.4 B1 Bedienungsanleitung

PowerFix PEK 2.4 B1

Use of the device

Switching the endoscope camera on and off

The endoscope camera is switched on and off by pressing the on/off switch
[4]. The power indicator [2] lights up green and, after a short delay, the image
is shown on the screen [1].

Lighting

The camera head is equipped with 4 LEDs. This lighting can be switched on
with the lighting button [7]. This button can also be used to gradually increase
the brightness of the LEDs by pressing it several times. When the highest level is
reached and the lighting button [7] is pressed again, the lighting switches off.

Screen brightness

The brightness setting of the screen can be changed with the brightness
adjustment button [8]. The brightness of the screen is gradually increased when
this button is pressed several times. When the highest level is reached and the
brightness adjustment button [8] is pressed again, the brightness setting is reset
to the default value.

Changing the display

The camera image can be rotated by 180° and mirrored vertically or
horizontally by pressing the view button [6]. This setting enables you to select
four different views. When the device is switched off, the last setting is retained.
English - 41