Mounting The Radiator Thermostat - HomeMatic HmIP-eTRV-C Montage- Und Bedienungsanleitung

Start-up
popular manufacturers such as Heimeier, MNG, Junkers,
Landis&Gyr (Duodyr), Honeywell-Braukmann, Oventrop,
Schlösser, Comap, Valf Sanayii, Mertik Maxitrol, Watts,
Wingenroth (Wiroflex), R.B.M, Tiemme, Jaga, Siemens
and Idmar.
By means of the adapters in the delivery, the device can
also be installed on radiator valves of type Danfoss RA,
Danfoss RAV and Danfoss RAVL (see „5.2.3 Adapter for
Danfoss" on page 44).
5.2.1

Mounting the radiator thermostat

In case of visible damage of the existing radiator,
valve or heating pipes, please contact a specialist.
Remove the old thermostat dial from your radiator valve.
To do this, please proceed as follows:
• Rotate the thermostat dial to the maximum value
(G) anti-clockwise (see figure 5). The thermostat
dial then no longer presses against the valve spig-
ot, making it easier to remove.
There are different ways of fixing the position of the ther-
mostat dial:
• Union nut: Unscrew the union nut in an anti-
clockwise direction (F). The thermostat head can
then be removed (H).
• Snap-on fastenings: Thermostat dials that are
42