Adapter For Danfoss - HomeMatic HmIP-eTRV-C Montage- Und Bedienungsanleitung

Start-up
5.2.3

Adapter for Danfoss

One of the provided adapters is required to attach to
Danfoss valves. The assignment of the suitable adapter
to the relevant valve can be found in the following illus-
trations.
Please ensure that you do not trap your fingers
between the two halves of the adapter!
The RA and RAV adapters have been manufactured with
pre-tension in order to provide a better seat. Use a screw-
driver during installation if necessary, and bend it open
slightly in the vicinity of the screw (see following figures).
44