Mounting On A Radiator - HomeMatic HMCCRTDN Bedienungsanleitung

yed, the motor still reverses. If only „InS" is shown in
the display, the radiator thermostat can be mounted on
the valve (see sec. „7.3 Mounting on a radiator").
The radiator thermostat can be configured al-
ready before installation. Therefore, press the
Auto/Manu button (
while „InS" is still displayed. For further details,
please see sec. „14 Configuration menu". After fi-
nishing configuration, „InS" is displayed again
and the radiator thermostat can be mounted (see
sec. „7.3 Mounting on a radiator").
Date and time can be adjusted via the configu-
ration menu also after installation.
If the device has already been taught-in to a
Central Control Unit or to another radiator ther-
mostat, the radiator thermostat will be receiving
date and time from one of there devices. In this
case, entering date and time will not be reque-
sted.

7.3 Mounting on a radiator

The HomeMatic Radiator Thermostat is easy to install,
and can be done without draining heating water or in-
tervening in the heating system. No special tools are
64
) longer than 3 seconds,